Panoramic Rocky Mountain National Park

This write-up was also shared on PetaPixel

First rule for any photographers, portrait, landscape, or weddings: always, ALWAYS check your gear, count it twice, because the last thing you don’t want to happen is not having the right gear for what you want to shoot.

But shit happens, none of us are perfect. Just like when I went for a long weekend trip to the Rocky Mountain National Park, the highest altitude national park in the lower 48 with sweeping views of the Continental Divide. Annnnnd I forgot my wide-angle lens… Trying to pack light with just one lens, I ended up carrying my 55-200 zoom lens instead.

So when we hiked up Chasm Lake, coming up to a sweeping view of the craggy peaks, waterfalls and mists, I was pretty upset at myself for forgetting my 10-24mm. But then I harkened back to my early days starting this hobby, when I used to do a lot more panoramic shots with a kit lens before ponying up for a proper wide angle or even a tripod.

Above: iPhone shot at Chasm Lake.  If nothing else, a picture with your phone to remember your trip is better than none at all.

So here’s what I did to get a panoramic shot without a tripod:

1.  Frame the picture in my mind, so I remember where to start and where to stop

2.  Meter at one of the frames, and set everything to manual to fix the settings (aperture, shutter speed, focus, ISO, white balance). This is so that the exposures on each frames are the same

3.  Hold the camera close to my body with my elbows squared on my torso, my left hand holding the base of the lens.

4. Start shooting at the center of the frame that I wanted to shoot for, and start spiralling out, pivoting the camera with my left hand as the axis. Basically trying to avoid parallax errors by pivoting as close to the base of the lens as possible.
 Using LCD Live View mode is useful here because you want to try to stay as still as possible (suck on that you viewfinder Nazis!)

5.  Take a picture of the ground or with the lens cap on, so I know when my series of panorama pictures ends

6. Put everything back to your previous setting, so you won’t screw up your next shot by leaving it in the last setting (lesson learned the hard way)

After my trip, I downloaded all the pictures to Lightroom CC and used the built-in stitching tool (Menu bar: Photo > Merge > Panorama). Which is a great tool since I no longer have to rely on third party apps, like Hugin, to stitch my photos. Granted, it’s not as much control as Hugin, but it works pretty well for the most part.

My panorama consisted of 20 pictures total, and with my aging 2010 Macbook the stitching takes a while to complete (but not too bad, like 15 minutes or so).

Untitled photo

Once Lightroom is done stitching, I cropped the picture to remove the white spaces. And do my minor post processing after (exposure, contrast, colors).

Note: before starting the stitch, I do apply the image sharpening to all the frames first.

Untitled photo

And just like that, I get to have a picture to remember the scenery even without my wide angle lens. And on the plus side, I get crazy details on this picture (mind you the JPEG is about ~66MB at full rez).

You can also see the full resolution here.

Can you spot the hikers at the trail just over the upper left of the waterfall?

Untitled photo

So yeah, you can do a panoramic shot without a tripod or a wide-angle lens. It’s not perfect, and sometimes you do get parallax errors without having a proper tripod/panoramic plate. But hey, when you’re in a pinch, it never hurts to try.
You can always make do with what you got and it might just force you to think a little more creatively.  

And I did also took a few other panoramas with a proper tripod….

And finally, here are just some gratuitous furry animal pictures from the trip. When the telezoom lens actually came in handy...

Camera: Fuji X-Pro2

Lens: Fuji XF 55-200 f/3.5-5.6


  • No Comments